Risultati: 315
Seleziona Immagine Codice
 Produttore
Descrizione Scheda dati Disponibilità Prezzi (EUR) Filtra i risultati nella tabella per prezzo unitario in base alla quantità.
Qtà RoHS Modello ECAD Tipo di prodotto
Prodotto
Frequenza
Range di frequenza
Tensione nominale
Impedenza
Stile di terminazione
Package/involucro
Temperatura di lavoro minima
Temperatura di lavoro massima
Marki Microwave Condizionamento del segnale The MM2-0530H is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530H is available as a wire bondable chip or connectorized SMA package.
Scheda dati
3A magazzino
Min: 1
Mult.: 1

Signal Conditioning
Marki Microwave Condizionamento del segnale A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
Scheda dati
16In ordine
Min: 1
Mult.: 1

Signal Conditioning Baluns 200 kHz to 6 GHz 200 kHz to 6 GHz 50 Ohms
Marki Microwave Condizionamento del segnale The BAL-0026 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 26.5 GHz bandwidth.
Scheda dati
6In ordine
Min: 1
Mult.: 1

Signal Conditioning Baluns 300 kHz to 26.5 GHz 300 kHz to 26.5 GHz 50 Ohms Connector
Marki Microwave Condizionamento del segnale MMIQ-0218L is a low LO drive, passive GaAs MMIC IQ mixer that operates across a 9:1 bandwidth. This is an ultra-broadband mixer spanning 2 to 18GHz on the RF and LO ports with an IF from DC to 3 GHz.
Scheda dati
13In ordine
Min: 1
Mult.: 1

Signal Conditioning Mixers 0 Hz to 3 GHz, 2 GHz to 18 GHz 0 Hz to 3 GHz, 2 GHz to 18 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Condizionamento del segnale The ADM-8344 is a wideband distributed low noise amplifier capable of providing 18 dB gain and +27 dBm OIP3 from DC to 18 GHz and a low 1.4 dB typical noise figure from 4 to 7 GHz.
Scheda dati
101/01/2027 previsto
Min: 1
Mult.: 1

Signal Conditioning
Marki Microwave Condizionamento del segnale A high-linearity amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM1-8096PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Scheda dati
111/12/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning
Marki Microwave Condizionamento del segnale A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
Scheda dati
330/10/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning Baluns 200 kHz to 3 GHz 200 kHz to 3 GHz 50 Ohms Connector
Marki Microwave Condizionamento del segnale The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth.
Scheda dati
222/12/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning Baluns 300 kHz to 36 GHz 300 kHz to 36 GHz
Marki Microwave Condizionamento del segnale The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
Scheda dati
811/12/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning Bias Tees 50 Ohms Connector
Marki Microwave Condizionamento del segnale The C13-0140 is a broadband 1-40 GHz, 13 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
Scheda dati
124/12/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning
Marki Microwave Condizionamento del segnale The C20-0R520 is a broadband 0.5-20 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
Scheda dati
222/12/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning
Marki Microwave Condizionamento del segnale This coupler features a unique air-line construction that simultaneously enables extremely low loss, minimal return loss, and outstanding directivity throughout the entire frequency range to 50 GHz.
Scheda dati
123/10/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning
Marki Microwave Condizionamento del segnale The CBR16-0003 offers the highest directivity of any standalone 3 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
Scheda dati
3In ordine
Min: 1
Mult.: 1

Signal Conditioning 200 kHz to 3 GHz 200 kHz to 3 GHz Connector
Marki Microwave Condizionamento del segnale The CBR17-0026 offers the broadest bandwidth of any standalone bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
Scheda dati
201/09/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning 200 kHz to 26 GHz 200 kHz to 26 GHz Connector
Marki Microwave Condizionamento del segnale The EBAL-0040 is an ultra-broadband 1:2 balun (unbalanced to balanced transformer), hand-tuned for optimal amplitude and phase balance.
Scheda dati
111/09/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning
Marki Microwave Condizionamento del segnale The MM2-0530L is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530L is available as a wire bondable chip or connectorized SMA package.
Scheda dati
331/12/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning Mixers Connector - 55 C + 100 C
Marki Microwave Condizionamento del segnale The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave 1.75-5.0 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either upconversion or downconversion.
Scheda dati
121/08/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning
Marki Microwave Condizionamento del segnale The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
Scheda dati
123/10/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning
Marki Microwave Condizionamento del segnale A resistive 2-way power divider that features broadband operation from DC to 20 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Scheda dati
413/01/2027 previsto
Min: 1
Mult.: 1

Signal Conditioning Power Dividers 0 Hz to 20 GHz 0 Hz to 20 GHz 50 Ohms Connector
Marki Microwave Condizionamento del segnale The T3-1040G is a high performance mixer featuring LO/RF from 10 to 40 GHz and IF from 1 to 18 GHz.
Scheda dati
213/01/2027 previsto
Min: 1
Mult.: 1

Signal Conditioning Mixers 10 GHz to 40 GHz Connector - 55 C + 100 C
Marki Microwave Condizionamento del segnale The T3-12 is a high performance mixer featuring LO/RF from 10 MHz to 12 GHz and IF from 1 MHz to 4 GHz.
Scheda dati
311/09/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning Mixers 10 MHz to 12 GHz, 1 MHz to 4 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Condizionamento del segnale The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.
Scheda dati
121/08/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning Mixers 10 MHz to 20 GHz 10 MHz to 20 GHz Connector - 55 C + 100 C
Marki Microwave Condizionamento del segnale A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 10 GHz bandwidth.
Scheda dati
101/09/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning
Marki Microwave Condizionamento del segnale This general purpose high pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during up-conversion or for removing spurious interference and noise.
Scheda dati
131/08/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning
Marki Microwave Condizionamento del segnale The MM1-1857H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
Scheda dati
115/12/2026 previsto
Min: 1
Mult.: 1

Signal Conditioning