Emergency LED Drivers

Hatch Emergency LED Drivers feature a constant power design architecture and are UL listed for factory or field installation. They allow an LED lighting fixture to be used in normal and emergency operation modes. These drivers will operate an existing fixture for a minimum of 90 minutes during a power failure and include a test switch and charge indicator. Hatch Emergency LED Drivers work with switched or unswitched fixtures in dry or damp locations. They are also suitable for use with surface-mount or recessed IC or non-IC products listed to UL standards. The Hatch ELP-LED-K LED strips allow emergency lighting to be easily integrated into LED retrofit fixtures as well as non-LED fixtures. They are available in three lengths with maximum input powers of 7W, 12W and 20W.

Risultati: 8
Seleziona Immagine Codice
 Produttore
Descrizione Scheda dati Disponibilità Prezzi (EUR) Filtra i risultati nella tabella per prezzo unitario in base alla quantità.
Qtà RoHS Modello ECAD Modalità operativa
Corrente di uscita - Canale 1
Tensione di uscita - Canale 1
Potenza di uscita
Tensione di ingresso
Oscuramento graduale
Numero di uscite
Stile di montaggio
Lunghezza
Larghezza
Altezza
Settore
Serie
Hatch Lighting Alimentatori a LED 10W 120-277Vac 20-60Vdc CP Emergency Driver W/ Single Conduit
Scheda dati

Constant Power (CP) 179 mA 20 VDC to 60 VDC 10 W 120 VAC to 277 VAC With Dimming 1 Output Chassis Mount 291 mm (11.457 in) 43 mm (1.693 in) 29.1 mm (1.146 in) Industrial
Hatch Lighting Alimentatori a LED 20W 120-277Vac 24-55Vdc CP Emergency Driver W/ Single Conduit
Scheda dati

Constant Power (CP) 363 mA to 833 mA 24 VDC to 55 VDC 20 W 120 VAC to 277 VAC With Dimming 1 Output Chassis Mount 337.8 mm (13.299 in) 60.3 mm (2.374 in) 38.1 mm (1.5 in) Industrial
Hatch Lighting Alimentatori a LED 20W 120-277Vac 24-55Vdc CP Emergency Driver W/ No Conduit
Scheda dati

Constant Power (CP) 363 mA to 833 mA 24 VDC to 55 VDC 20 W 120 VAC to 277 VAC With Dimming 1 Output Chassis Mount 337.8 mm (13.299 in) 60.3 mm (2.374 in) 38.1 mm (1.5 in) Industrial
Hatch Lighting Alimentatori a LED 10W 120-277Vac 20-60Vdc CP Emergency Driver W/ No Conduit
Scheda dati

Constant Power (CP) 179 mA 20 VDC to 60 VDC 10 W 120 VAC to 277 VAC Without Dimming 1 Output Chassis Mount 241 mm (9.488 in) 43 mm (1.693 in) 29.5 mm (1.161 in) Industrial
Hatch Lighting Alimentatori a LED Alimentatori a LED, 7W, Emergency LED light strip Accessory
Scheda dati

300 mA 24 VDC 7 W 1 Output 150.114 mm (5.91 in) 23.114 mm (0.91 in) Industrial ELP07
Hatch Lighting Alimentatori a LED Alimentatori a LED, 12W, Emergency LED light strip Accessory
Scheda dati

600 mA 24 VDC 12 W 1 Output 219.964 mm (8.66 in) 23.114 mm (0.91 in) Industrial ELP12
Hatch Lighting Alimentatori a LED Alimentatori a LED, 20W, Emergency LED light strip Accessory
Scheda dati

750 mA 35 VDC 20 W 1 Output 360.172 mm (14.18 in) 22.86 mm (0.9 in) Industrial ELP20
Hatch Lighting Alimentatori a LED Alimentatori a LED, 14W, Emergency LED Driver w/Battery Backup, 120VAC-277VAC, 20VDC-60VDC, Constant Power
Scheda dati

Constant Power (CP) 241 mA to 700 mA 20 VDC to 60 VDC 14 W 120 VAC to 277 VAC Without Dimming 1 Output Chassis Mount 337.82 mm (13.3 in) 60.198 mm (2.37 in) 38.1 mm (1.5 in) Industrial ELP14